View Single Post
  #4 (permalink)  
Old 17-09-18, 01:41 PM
PEU186F PEU186F is offline
Member
 
Join Date: Apr 2015
Posts: 61
Default

You will find the article I mentioned in the Bristol Owners Club Bulletin Number 142, dated Autumn 2011 and the good news is that it actually describes a 411 heater and ventilation system, not an earlier model which is what my memory told me.

I found it extremely useful when I had the 410s heater out to replace seals etc. The heater box itself is apparently identical.

Two points

I found that there was a very simple gravity flap on the 410s heater which opens a direct path into the heater box from the air intake in front of the windscreen when the pressure in the former overcame the pressure supplied by the fan. So at speed the air doesn't all have to pass through the fan. I don't see any reference to this in the article, perhaps the 411 was different. I also discovered that the foam on this flap had long since perished causing it to close at intervals with a surprisingly loud, rather alarming and previously untraceable clang.

I see I marked up the copy that found its way into my workshop manual, at the bottom of page 27 to read "Slacken screw E ..........at the point F and retighten screw E"

Trust you have a good tour

Roger
Reply With Quote