Bristol Cars - Owners and Enthusiasts Forum

Bristol Cars - Owners and Enthusiasts Forum (http://www.bristolcars.info/forums/)
-   8 & 10 cyl Bristol cars (http://www.bristolcars.info/forums/8-10-cyl-bristol-cars/)
-   -   lower ball joints and rubbers 411 mk 2 (http://www.bristolcars.info/forums/8-10-cyl-bristol-cars/299-lower-ball-joints-rubbers-411-mk-2-a.html)

peter dowdle 06-09-09 10:45 AM

lower ball joints and rubbers 411 mk 2
 
can any one advise what alternative sourc of lower ball joints (in particular the rubbers) for my 411

the rubbers are badly torn but the ball joint doesnt have any noticable wear

have heard either jag or possible bentley

regards peter dowdle

Nick Challacombe 06-09-09 03:40 PM

lower ball joints and rubbers 411 mk 2
 
Bristols Cars , if not in stock then try ACCS

peter dowdle 07-09-09 03:50 AM

lower ball joints and rubbers 411 mk 2
 
thanks nick but who are accs

i understand bristo have them but at 430 pounds each ??????

was hoping they may be from some other car so that i can source them in
australia

Kevin H 07-09-09 07:17 AM

Quote:

Originally Posted by peter dowdle (Post 1687)
i understand bristo have them but at 430 pounds each ??????

But surely that's for the whole ball joint? (although it's gone up a lot - last time I enquired they were £200).

Do Bristol not sell just the rubber covers for the ball joints?

They certainly used to. When I bought mine they were £37 each, but that was probably 8-9 years ago.

I know it seems a lot for a bit of moulded rubber, but the those ball joints are clearly worth protecting!

peter dowdle 07-09-09 08:10 AM

lower ball joints and rubbers 411 mk 2
 
kevin price feb 09
lower ball joint 427.00 pounds

upper 230.88 pounds

havnt checked for availability of rubbers

have been advised uppers are jag

lowers bentley but dont know the models

John Keighley 07-09-09 10:11 AM

lower ball joints and rubbers 411 mk 2
 
Peter,
I had these replaced in in our 410 during restoration but we had to get these from BCL.
John Keighley

MYTA21 07-09-09 11:26 AM

lower ball joints and rubbers 411 mk 2
 
I think that for 37 GBP, you get what they term is a repair kit - that's
what they sent me when I needed some 409 ones. However, I showed the
rubber gaiter to a local garage and they got the two gaiters for just A$20
and they fitted perfectly, so worth a look first
Mike O

MYTA21 07-09-09 09:20 PM

lower ball joints and rubbers 411 mk 2
 
If it helps with the later car, the lower ball joint repair kits for the
409, sent by BCL are marketed by Prestige Parts with Part no UR73256KT
Pack says " Quality components for Rolls Royce and Bentley " They were
invoiced as TR8374 at GBP46 each. Contents - gaiter, two circlips and some
plastic/nylon bushes.

The Gaiters I bought locally in SA came in bags with a makers name begining
with K.
If a loan of my kits here in Australia or further info needed pls let me
know
Mike O

MYTA21 07-09-09 11:00 PM

lower ball joints and rubbers 411 mk 2
 
I also have two UPPER gaiters to suit 409 - BCL sent 4 upper instead of
two upper and two lower.
If they can help with a later car,let me know - happy to loan them to an
Australian member.

Also, Claude over in NZ has a wide array of front bushes and kits excess to
requirements that he wished to dipsose of a while back
Mike O

dwomby 24-03-23 05:19 PM

I am looking for lower ball joints for my 408 Mk1. I know Jaguar will work for the upper (as mentioned above) and the rebuild kit mentioned above is still available but I suspect ther lower ones were a stock item used by some other manufacturer - did anybody find an alternate 3rd party part for this?

David

David C 27-03-23 07:51 PM

A little research suggests that the UR73256K kit is suitable for: 1965-1980 RR Silver Shadow I, II & Bentley T1, T2. Unconfirmed, but could be a good place to start.

Prestige Parts shows this part number is for seats and seals. The gaiter can be obtained seperately (Part No. UR13269SA)

dwomby 28-03-23 12:02 PM

Quote:

Originally Posted by David C (Post 12620)
A little research suggests that the UR73256K kit is suitable for: 1965-1980 RR Silver Shadow I, II & Bentley T1, T2. Unconfirmed, but could be a good place to start.

Prestige Parts shows this part number is for seats and seals. The gaiter can be obtained seperately (Part No. UR13269SA)

Thanks. I think I'll be OK without rebuilding them. They are operating smoothly and there's an adjustment screw in the bottom to take up any excess plaay.

David


All times are GMT. The time now is 03:09 PM.

This is the live site


Search Engine Friendly URLs by vBSEO 3.6.0 PL2