Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

Wheel spacers

Reply
 
Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 21-08-17, 12:08 PM
Member
 
Join Date: Mar 2009
Location: West Wales.
Posts: 458
Default Wheel spacers

I was talking to a fellow 603 owner yesterday and some other club members at the BOC event at Yeovil and the subject of wheel spaces came up to widen the track at the rear of the car.
Is this what Bristol did on the later cars or did they actually fit a wider axle, are wheel spacers a good idea or do they pose any potential problems or safety risks. Also how do insurers view this modification.
I would be interested of any thoughts on, or experiences with this modification and if it was successful the make and source of spacers that would fit.
Geoff.
Reply With Quote
  #2 (permalink)  
Old 21-08-17, 01:58 PM
Member
 
Join Date: Feb 2010
Posts: 32
Default

There are two ways to go, a simple spacer or the adapter type. For the spacer, I would suggest anything more than 5 or 6mm would require longer studs, which are an unusual thread (but from memory same as Land Rover) - some LR suppliers may make overlong studs.

The adapter plate type: problems I foresee - You would need to ensure that existing studs finish flush with the face of the plate, otherwise the wheel will not sit on the machined face, so the wheel arch needs to accommodate something like a 40mm spacer, anything less and the existing studs would need shortening. The OD of the raised centre piece has to be compatible with the centre hole of the wheel. New nuts will be needed to locate the adapter plate and the wheels to the adapter. Or change the bolts so existing wheel nuts can be utilised.

Not a straightforward 5 minute job as most options require modified studs and the removal of the rear hub.

A fatter tyre helps fill the arch. I have 235/70/15 on standard rims on the rear.

I would suggest modest spacers are not a danger, as they remain freely on sale.

No experience of Insurer's views on spacers, but having read horror stories about them refusing to pay out for the flimsiest of reasons, I always make a point of declaring wider tyres, which has yet to cause any comment.
Attached Images
File Type: jpg Jaguar spacer 1.jpg (225.3 KB, 14 views)
File Type: jpg Jaguar spacer2.jpg (157.8 KB, 11 views)
Reply With Quote
  #3 (permalink)  
Old 22-08-17, 06:59 AM
TBC TBC is offline
Member
 
Join Date: Nov 2008
Location: Thailand
Posts: 56
Default

Quote:
Originally Posted by herrbartlet View Post
There are two ways to go, a simple spacer or the adapter type. For the spacer, I would suggest anything more than 5 or 6mm would require longer studs, which are an unusual thread (but from memory same as Land Rover) - some LR suppliers may make overlong studs.

The adapter plate type: problems I foresee - You would need to ensure that existing studs finish flush with the face of the plate, otherwise the wheel will not sit on the machined face, so the wheel arch needs to accommodate something like a 40mm spacer, anything less and the existing studs would need shortening. The OD of the raised centre piece has to be compatible with the centre hole of the wheel. New nuts will be needed to locate the adapter plate and the wheels to the adapter. Or change the bolts so existing wheel nuts can be utilised.

Not a straightforward 5 minute job as most options require modified studs and the removal of the rear hub.

A fatter tyre helps fill the arch. I have 235/70/15 on standard rims on the rear.

I would suggest modest spacers are not a danger, as they remain freely on sale.

No experience of Insurer's views on spacers, but having read horror stories about them refusing to pay out for the flimsiest of reasons, I always make a point of declaring wider tyres, which has yet to cause any comment.
Would you be good enough to post pictures of your 603 wearing 205 and 235 tyres so that we can see the difference in appearance?
Reply With Quote
  #4 (permalink)  
Old 11-10-17, 11:42 AM
Member
 
Join Date: Aug 2008
Posts: 7
Default Wheel spascers

I fitted the alloy spacers which srew onto the hub to my 603. Sourced from Greg Lowe.
Attached Images
File Type: jpg THW 16.jpg (163.1 KB, 31 views)
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 05:11 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2