Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 8 & 10 cyl Bristol cars

8 & 10 cyl Bristol cars Type 407 onwards - restoration, repair, maintenance etc

Air conditioning on a 409

Reply
 
Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 22-09-16, 01:16 PM
Member
 
Join Date: Jan 2015
Location: Calgary CDN
Posts: 54
Default Air conditioning on a 409

Has A/C been adapted to a 409 and if so what system was used?
Anne
Reply With Quote
  #2 (permalink)  
Old 22-09-16, 02:18 PM
Member
 
Join Date: Oct 2010
Location: Vineyard Lodge Sydenham Hill
Posts: 62
Default

Classic Auto Air - Air Conditioning & Heating for 70’s & Older Cars & Trucks.
Classic Air is what I have used in a Bentley.
I've not seen an integrated dash air con system put on a 409.
My system is in the boot and discharges cold air from pods on the parcel shelf.
I wouldn't do that again and would go for a front mounted underdash unit but couldn't find anything which didn't detract from the beauty of the dashboard.
You may have the same problem with the 409, 2 of which I've owned.
Reply With Quote
  #3 (permalink)  
Old 22-09-16, 09:05 PM
Member
 
Join Date: Jan 2015
Location: Calgary CDN
Posts: 54
Default

OK thanks. I am more interested in the compressor location and the drive for it. May follow up with the link you provided.

Anne
Reply With Quote
  #4 (permalink)  
Old 23-09-16, 01:39 AM
Member
 
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,168
Default

Hi Anne,

I suggest looking at the universal system sold by Vintage Air. I have one of these in my 411, which is very similar to the 409.

The Vintage Air units provide heating and cooling, so you can remove the Smiths heater box and that's where the evaporator goes, so it uses all of the existing heater vents. The original heater controls become redundant.

The unit come with a small control panel which was originally fitted below the dashboard in my car, but I am in the middle of trying to adapt the original heater controls to control the A/C unit.

I have the pipework to the condenser routed through the inner wing above the spare wheel.

I currently have an original Chrysler A/C compressor, but I would recommend using the modern compressor that Vintage Air sells. Either way, you have to modify the belt and ancillaries configuration on the front of the engine.

One problem you will almost certainly encounter is an engine cooling issue after mounting the condenser in front of the radiator, particularly with the original Bristol cooling fans. I would suggest removing both the original electric fan in front of the radiator and replacing it with two smaller modern electric fans mounted directly on the condenser, and also mount a slim electric fan on the engine side of the radiator to pull air through the condenser and radiator "sandwich" (I no longer have an engine driven fan on my 411). The electric fans should be wired to come on by thermostat but also always come on when the A/C is engaged. I actually had my cooling system re-modelled, but I'm not sure that is necessary.

I hope this helps!

kevin
Reply With Quote
  #5 (permalink)  
Old 23-09-16, 10:28 AM
Member
 
Join Date: Jan 2015
Location: Calgary CDN
Posts: 54
Default

Kevin,
Ok thanks...I realize that I will have to do something with the cooling system. Currently I have one large electric fan replacing the 2 "sad" little fans but with AC this would change things.
The otter switch also comes on way too early so I have it unplugged and use the manual switch.
If you get a chance, can you post a picture of how/were the compressor is mounted?
Thanks,
Anne
Reply With Quote
  #6 (permalink)  
Old 26-09-16, 11:45 AM
Member
 
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,168
Default

Anne,
Please find below a photo showing the compressor position when it was first installed. The smaller photo ("later AC install") shows what it looks like now, using the Chrysler A/C compressor and a period alternator.

It will actually be easier on the 409 than the 411, because on the 411 we had to remove the pump for the self levelling suspension, then move the (new) alternator to the other side of the engine, before mounting the compressor where the alternator had been. I can't recall why we didn't just put the compressor where the suspension pump had been, but it was done a long time ago!

Regards,
Kevin
Attached Images
File Type: jpg later AC install.jpg (371.7 KB, 50 views)
File Type: jpg engine-bay-pre-resto.jpg (623.7 KB, 43 views)
Reply With Quote
  #7 (permalink)  
Old 26-09-16, 05:57 PM
Member
 
Join Date: Jan 2015
Location: Calgary CDN
Posts: 54
Default

Ok thanks...that makes it much easier to follow.
Best,
Anne
Reply With Quote
  #8 (permalink)  
Old 01-10-16, 05:27 PM
Member
 
Join Date: Mar 2014
Location: Geneva, Switzerland
Posts: 36
Default

I also used the Vintage Air set, but used a slightly different approach to positioning the compressor, using some of the used space on the side of the bonnet. See a drawing showing where all the components go (on another car), and then a couple of pictures on the car itself while being worked on.

I used the original heater controls for both AC and heater, and connected the Vintage air outlets to the original ones, adding a few unobtrusive ones under the dash for direct airflow.
Attached Images
File Type: jpg IMG_0126.jpg (116.0 KB, 45 views)
File Type: jpg IMG_2137.jpg (296.6 KB, 43 views)
File Type: jpg IMG_2139.jpg (339.6 KB, 48 views)
Reply With Quote
  #9 (permalink)  
Old 08-10-16, 05:51 PM
Member
 
Join Date: Mar 2014
Location: Geneva, Switzerland
Posts: 36
Default

Here's a (bad) picture of the dash with the added front vents: two in the center and one on each side
Attached Images
File Type: jpg IMG_0498.jpg (129.2 KB, 49 views)
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 05:21 AM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2