Bristol Cars - Owners and Enthusiasts Forum  

Go Back   Bristol Cars - Owners and Enthusiasts Forum > Bristol Forums > 6 cyl Bristol cars

6 cyl Bristol cars Type 400 to 406 - restoration, repair, maintenance etc

Replacing Drum Brakes with Discs

Like Tree1Likes
  • 1 Post By GREG

Reply
 
Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 25-07-14, 05:10 AM
Member
 
Join Date: Jan 2010
Location: Redditch, Worcester, England
Posts: 57
Default Replacing Drum Brakes with Discs

I've finally decided to throw the towel in with the Drum Brakes on my 401. No real stopping power even with a servo and too much Brake fade.

Has anyone had any REAL experience with replacing their drum brakes and what Discs might fit a 401 without mods?

I did spot an earlier discussion of this topic but it was not as informative as I had hoped.

Last edited by Bobbyweaf; 25-07-14 at 06:32 AM.
Reply With Quote
  #2 (permalink)  
Old 25-07-14, 08:00 AM
Member
 
Join Date: Apr 2009
Location: York
Posts: 808
Default

Yep , the 405 / 406 discs will go on ( need to get them from a broken car ) but I found the 401 drums with a servo are just as good if not better ! So I would look at the operation / adjustment of what you have first.

Coopercraft do an expensive kit

Could probably make something up from E Class Merc rear discs ( same PCD )
Reply With Quote
  #3 (permalink)  
Old 25-07-14, 09:26 AM
Member
 
Join Date: Jul 2008
Location: Sydney, Australia
Posts: 406
Default

Bobbyweaf,
I converted my 400/452 to 406 hubs and discs on the front with Girling #17 caliper from a late Humber Snipe (& recently fitted Coopercraft Alloy calipers ) .
The rears I used the rear disc from a BMW 5 series c1990's but the PCD had to be changed to suit the Bristol stud pattern . The M Benz stud pattern is the same as Bristol at 113mm PCD and I know of one 401 in Australia that has the M Benz disc fitted over the STD 401 front hub , but from memory the diameter of the disc is smaller than the 406 or BMW.
You need to use a rear caliper as it has a lot of offset to fit on the outside of the 400 - 405 hub. The 406 caliper fits on the inside face of the front hub and has lesser offset.
On both front & rear I had to fabricate a caliper carrier .
I don't think it is worthwhile modifying the rears as there are problems with the handbrake operation.

If you fit discs to the front only you will have to either fit 7/8 inch diameter rear wheel cylinders OR a brake bias valve to the rear brake line, otherwise the rears will lock when applied hard.

A brake booster/servo of greater pressure than one suitable for drum brakes is essential . For drum brakes I use a servo with 820psi , for disc I use either 1270 or 1470 psi

If you have a 403 sway bar fitted you might have a problem with the caliper fouling the swaybar vertical link on full lock . The 406 has a shorter swaybar with offset vertical links to give clearance with the caliper.

For those wanting to fit disc to a 400 with the early wheels , the deeper ventilation dimples of these wheels might foul on the caliper. There is no problem using 401 - 405 wheels .

It is not a simple conversion but well worth it . I can now drive in traffic at any legal speed knowing I can brake as well or better than most modern cars .
It's a massive improvement over the standard 400 - 403 drum brakes with a servo and a big improvement on the 404 - 405 12 inch Alfins

I hope this helps
Good Luck
Geoff
Reply With Quote
  #4 (permalink)  
Old 25-07-14, 10:19 AM
Member
 
Join Date: Jan 2010
Location: Redditch, Worcester, England
Posts: 57
Default

Thanks Lads,

Is there a makers number for the 406 Callipers? Presumably Bristol's just bought standard items from X manufacturer that fitted to their requirements.

Sadly, I could not do the job myself but if a garage is to fit them, I would want to give them parts that are a straight fit without causing any problems.
Reply With Quote
  #5 (permalink)  
Old 25-07-14, 10:32 AM
Member
 
Join Date: Apr 2009
Location: York
Posts: 808
Default

Pretty sure they were the Dunlop ones that fitted the E type Jag, before they moved over to Girling for the 410 onwards....
Reply With Quote
  #6 (permalink)  
Old 25-07-14, 10:45 AM
Member
 
Join Date: Apr 2009
Location: York
Posts: 808
Default

Also make sure you fit new hoses or braided ones -- I have been amazed at the difference this makes, as the old ones must expand a lot like a balloon,making less pressure to the brakes.

Bristol and most modern Merc's are 112 PCD -- I think Stefano Pasini fitted 16" Audi steel wheels to his 409 -- looks the same and more option for a bigger tyre !

But with a bigger tyre you would need power steering !!! Ahh , leave it all alone :-))
Reply With Quote
  #7 (permalink)  
Old 25-07-14, 11:45 AM
Member
 
Join Date: Jul 2008
Location: Sydney, Australia
Posts: 406
Default

Bobbyweaf,
If you are not able to do the conversion yourself it will become a very expensive operation unless you can find a 406 being parted out . If not probably best to stick with the drum brakes , as with most classic cars today they are used rarely and not to the limit .

Geoff
Reply With Quote
  #8 (permalink)  
Old 25-07-14, 02:44 PM
Member
 
Join Date: Sep 2010
Posts: 260
Default

I have (refurbed) girling discs at the front and drums at the rear, new piping and a 4:1 servo, and the braking effect far exceeds the tyres (Michelin Taxi) capacity to grip!

It would be a lot cheaper to replace your brake lines first
Reply With Quote
  #9 (permalink)  
Old 27-07-14, 11:16 PM
Member
 
Join Date: Apr 2009
Location: York
Posts: 808
Default

Maybe best taking the car to a Jag specialist / restoration company and letting them take the lead and estimate the costs -- armed with the info from here ...

They may come up with something better than all of us !
Fiacre likes this.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT. The time now is 10:40 PM.


This is the live site

Search Engine Friendly URLs by vBSEO 3.6.0 PL2