View Single Post
  #9 (permalink)  
Old 19-08-08, 01:12 PM
RGSchmitt RGSchmitt is offline
Join Date: Jul 2008
Location: Burbank, California
Posts: 135
Default Engine Measurements

Kevin & Ash -

It seems logical there should not be a large differential between oil
and water temps, but perhaps the measurements need to be verified
first. I had an Alfa that seemed to be running hot and I chased
several solutions before discovering a bad water temp sensor.

Somewhat related - I've been researching fuel/air analyzers with a
plan to check several cars, including the Frazer Nash in NZ. I'm
leaning towards the Innovate LM-2. The optional "AuxBox" includes a
2-axis accelerometer and other sensors - almost a handheld
dyno. Anyoned with experience with similar units?


Admin Edit: As this post started a discussion about engine sensors, it has been copied to a new thread titled Engine Measurements and the posts related to this have been moved - see here

Last edited by devadmin; 20-08-08 at 09:55 AM. Reason: Split thread as topic changed
Reply With Quote