409 exhausts, Australia
>>I went the 'local company' route [in Scotland].
However I took in the spare parts book to give them an idea.
I specified 314 austenitic stainless for all parts, including the
internals, all 14 gauge, including stainless welding rods.
They were very good and the total price was £400.00 fitted.
I had previously had a local engineering workshop manufacture stainless
manifolds as mine had already been welded [poorly]
I would go with word of mouth, look at some of their work, talk to them,
but mainly write down what
you want done in as much detail as possible.
>
>
>
>
>
>
|