View Single Post
  #6 (permalink)  
Old 22-05-09, 02:15 PM
Kevin H Kevin H is offline
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,164

Originally Posted by MYTA21 View Post
Hello Kevin,
.... Would you be so kind as
to compare the data you have please?
Mike, the 411 springs are nominally 15" long - probably give or take 1/4 of an inch! However you need more information than that to make springs, such as spring rate (lbs/in), the diameter of the spring wire, the total number of coils and the number of active coils and the diameter of the spring.

If we can ascertain that 411 springs will be okay for a 409 I can provide the spring specs to you directly so you can get the springs made in Australia (it's not appropriate to publish this information).

Reply With Quote