View Single Post
  #9 (permalink)  
Old 21-09-22, 12:26 PM
peterg peterg is offline
Join Date: Sep 2010
Posts: 257

Thank you Mike.

I have the original wide felt strips, so assume the gaps were intended.

A couple of final queries. I took out four philips headed screws, about 1 1/2" long from the door and forgot to put them back. I couldn't work out what they did when I took them out and still can't. Any ideas?

Finally the winder had to be different! Instead of the spring mounted plate on the square section there is just a hole. Would a modified split pin be enough to lock the winding handle in place or is there a special piece that should be used?
Reply With Quote