View Single Post
  #2 (permalink)  
Old 14-07-22, 08:45 PM
AndrewA AndrewA is offline
Member
 
Join Date: Mar 2020
Posts: 181
Default

1. Don't remember it being a specialist tool but it was a pig of a job.
2. To do the job properly the framework should be removed which is what I had done but I understand it was and is common practice for people to cut the tubular framework out, replace the bushes and weld the frame back in. Mine had been done like this before and i wasn't going to risk cutting it again.
Hope this is some help.
Andrew
Reply With Quote