View Single Post
  #1 (permalink)  
Old 25-05-22, 10:43 AM
DODD DODD is offline
Member
 
Join Date: May 2018
Posts: 73
Default 410 Wiper Motor Wiring

Roger,

Follow on from my last reply on another thread; I would like to carry out a modification to the windscreen wiper motor on my 410. I would like to wire in a momentary toggle switch into the circuit.

As you know the wiper controls on a 410 are:- off, on normal and on fast. If you want an intermediate wipe it’s a case of a quick turn of the switch and off again.

When the insulation to the wiring on the wiper motor started to breakdown through old age last year, it was necessary to rewiring the wiper motor box. I thought at the time it may be possible to wire into the existing circuit a momentary toggle switch. Judging by some of your other replies in the forum you may have the answer as to whether it’s possible and also knowledge of a wiring diagram?

I would appreciate your thoughts or anyone else who may have done this modification.

Brian
Reply With Quote