View Single Post
  #9 (permalink)  
Old 31-12-21, 06:33 PM
Kevin H Kevin H is offline
Member
 
Join Date: May 2008
Location: Melbourne, Australia
Posts: 1,146
Default

Quote:
Originally Posted by OakHouse411 View Post
Am I right in assuming that I can't use the nuts from the steel wheels.
Certainly that was the case with the 411/412. If the alloy Avon wheels were fitted they required a sleeved wheel nut with a tapered washer. In addition to getting the correct thread, I suppose you also need to pay attention to the OD of the sleeve.
Reply With Quote