Yes I'm using the pickup from the top of the tank. The flexible pipe had all been renewed last year (from tank to pump and pump to hard pipe going forward) in an effort to ward off E10 issues and because the old one was pretty ropey anyway which made the pump swap easy - otherwise I would have done that at the same time.
The Facet pump also comes with the ability to change the pressure by unscrewing the bottom and using a different spring (like the SU dashpot spring!). The carb on mine (a 500 cfm Edelbrock) wants a maximum of 6.5 psi and the pump as it comes is 6 - 7 psi so I changed the spring to a 4-5 psi one.
Happy to post pictures - will have a read how to do it!
Andrew
Last edited by AndrewA; 06-10-21 at 06:11 AM.
|