View Single Post
  #7 (permalink)  
Old 10-03-21, 01:15 AM
peter dowdle peter dowdle is online now
Member
 
Join Date: Jul 2008
Location: woodhouse australia
Posts: 245
Default

David

I love originality and went to a lot of trouble to get my original air cleaner to fit. Could i suggest you try and borrow an original unit and see if there is any way you might get it to fit ( eg machine the top of the inlet manifold or cut out part of the base of the filter canister and raise it which will lower the unit overall ).
As I said I know little about the earier V8 cars but a quick look at photos on Google indicates the 408 had a smaller but higher unit than the 410.
By chance how thick is the gasket/ block between the carbie and the inlet manifold. I found a very thin but effective one made by Holley which did the job.
Reply With Quote