View Single Post
  #6 (permalink)  
Old 16-09-20, 06:42 PM
LarryW LarryW is offline
Member
 
Join Date: Dec 2019
Posts: 39
Default Removing unit body

Giles: Tried a 12 lb. lead hammer; torch; rust release.

No luck so I drilled out the bolt...began with a 1/8th inch drill bit and worked up to the full diameter of the bolt. Worked perfectly. Once this bolt was gone, the other five let go right away.
Attached Images
File Type: jpg drilled out bolt.JPG (708.1 KB, 29 views)
File Type: jpg rear of 409-334.JPG (708.1 KB, 27 views)
Reply With Quote